China P205 P206 P207 Saf Pillow UCP205 CAD Base Bearing Ukp Unit UCP 206 F205 Pillow Block Bearing carrier bearing

Item Description

1.Specification of the mounted ball bearing units

1)Pillow block a are most extensively utilised between the bearing units:UCP,UCPE,UCAK and SBLP,SBLLP.These varieties are mounted to the shafts by signifies of the setscrews well prepared in the innerring.

two)NAP,SALP and SALLP types are fixed to the shafts by the setscrews geared up in the eccentric locking collor.

3)UKP type is mounted to the shafts by use of adapter sleeves

four)Housing P200 series could be machined grooves on each sides to be mounted with metallic addresses for dust avoidance and safty objective.

two.The main merchandise of our factory

– Cast iron pillow blocks

– Thermoplastic bearing housing

– All stainless metal mounted models.

– Accu-Grip Concentric lock Bearing Models(New!)

– Rod ends

– Spherical simple bearings

– Agriculture Bearings(Disc Harrow Bearings)

    
 

Bearing mm h a e b S1 S2 g w n Bi
UCP202 fifteen thirty.two 127 95 38 13 19 14 62 11.five 27.4
UCP203 17 thirty.two 127 95 38 13 19 14 62 eleven.5 27.4
UCP204 20 33.three 127 ninety five 38 13 19 14 sixty five 12.3 31
UCP205 25 36.5 140 105 38 thirteen 19 15 seventy one fourteen.3 34.one
UCP206 30 42.9 a hundred sixty five 121 forty eight 17 21 seventeen 83 fifteen.9 38.1
UCP207 35 forty seven.6 167 127 48 seventeen 21 eighteen ninety three 17.five 42.nine
UCP208 forty forty nine.two 184 137 fifty four seventeen 21 eighteen 98 19 forty nine.2
UCP209 45 54 a hundred ninety 146 54 seventeen 21 twenty 106 19 forty nine.2
UCP210 fifty 57.two 206 159 60 twenty twenty five 21 114 19 fifty one.6
UCP211 55 63.five 219 171 60 twenty 25 23 126 22.2 55.six
UCP212 sixty sixty nine.eight 241 184 70 twenty 25 25 138 twenty five.4 sixty five.1
UCP213 sixty five seventy six.two 265 203 70 25 29 27 151 twenty five.four sixty five.1
UCP214 70 79.4 266 210 72 25 31 27 157 30.2 seventy four.six
UCP215 seventy five eighty two.6 275 217 74 twenty five 31 28 163 33.3 seventy seven.8
UCP216 80 88.nine 292 232 seventy eight twenty five 31 30 one hundred seventy five 33.three eighty two.six
UCP217 85 95.two 310 247 eighty three 25 31 32 1870 34.one 85.7
UCP218 90 102 327 262 88 27 33 33 two hundred 39.seven ninety six

   
 

Bearing mm a e b i g l z s n Bi
UCFL202 fifteen 113 90 60 15 twelve twenty five.five thirty.nine twelve eleven.five 27.4
UCFL203 17 113 ninety 60 15 12 twenty five.5 thirty.3 twelve eleven.five 27.4
UCFL204 20 113 90 60 fifteen twelve twenty five.five 33.7 12 twelve.three 31
UCFL205 25 130 ninety nine sixty eight 16 fourteen 27 35.8 sixteen fourteen.three 34.1
UCFL206 thirty 148 117 eighty eighteen fourteen 31 40.2 16 fifteen.nine 38.1
UCFL207 35 161 130 ninety 19 sixteen 34 forty four.four sixteen 17.five forty two.9
UCFL208 forty a hundred seventy five a hundred and forty four 100 21 sixteen 36 51.2 16 19 forty nine.2
UCFL209 45 188 148 108 22 18 38 fifty two.2 19 19 forty nine.two

 

Bearing mm h a e b
UCC202 fifteen 72 20 11.five 27.4
UCC203 seventeen 72 20 eleven.5 27.4
UCC204 twenty 72 twenty 12.three 31
UCC205 twenty five 80 22 14.three 34.one
UCC206 thirty 85 27 15.9 38.1
UCC207 35 90 28 17.five forty two.9
UCC208 forty a hundred 30 19 forty nine.two
UCC209 forty five a hundred and ten 31 19 forty nine.2

 

Contact Angle: 25°
Aligning: Aligning Bearing
Separated: Separated
Rows Number: Multiple
Load Direction: Radial Bearing
Material: Carbon Steel

###

Samples:
US$ 4/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

Bearing mm h a e b S1 S2 g w n Bi
UCP202 15 30.2 127 95 38 13 19 14 62 11.5 27.4
UCP203 17 30.2 127 95 38 13 19 14 62 11.5 27.4
UCP204 20 33.3 127 95 38 13 19 14 65 12.3 31
UCP205 25 36.5 140 105 38 13 19 15 71 14.3 34.1
UCP206 30 42.9 165 121 48 17 21 17 83 15.9 38.1
UCP207 35 47.6 167 127 48 17 21 18 93 17.5 42.9
UCP208 40 49.2 184 137 54 17 21 18 98 19 49.2
UCP209 45 54 190 146 54 17 21 20 106 19 49.2
UCP210 50 57.2 206 159 60 20 25 21 114 19 51.6
UCP211 55 63.5 219 171 60 20 25 23 126 22.2 55.6
UCP212 60 69.8 241 184 70 20 25 25 138 25.4 65.1
UCP213 65 76.2 265 203 70 25 29 27 151 25.4 65.1
UCP214 70 79.4 266 210 72 25 31 27 157 30.2 74.6
UCP215 75 82.6 275 217 74 25 31 28 163 33.3 77.8
UCP216 80 88.9 292 232 78 25 31 30 175 33.3 82.6
UCP217 85 95.2 310 247 83 25 31 32 1870 34.1 85.7
UCP218 90 102 327 262 88 27 33 33 200 39.7 96

###

Bearing mm a e b i g l z s n Bi
UCFL202 15 113 90 60 15 12 25.5 30.9 12 11.5 27.4
UCFL203 17 113 90 60 15 12 25.5 30.3 12 11.5 27.4
UCFL204 20 113 90 60 15 12 25.5 33.7 12 12.3 31
UCFL205 25 130 99 68 16 14 27 35.8 16 14.3 34.1
UCFL206 30 148 117 80 18 14 31 40.2 16 15.9 38.1
UCFL207 35 161 130 90 19 16 34 44.4 16 17.5 42.9
UCFL208 40 175 144 100 21 16 36 51.2 16 19 49.2
UCFL209 45 188 148 108 22 18 38 52.2 19 19 49.2

###

Bearing mm h a e b
UCC202 15 72 20 11.5 27.4
UCC203 17 72 20 11.5 27.4
UCC204 20 72 20 12.3 31
UCC205 25 80 22 14.3 34.1
UCC206 30 85 27 15.9 38.1
UCC207 35 90 28 17.5 42.9
UCC208 40 100 30 19 49.2
UCC209 45 110 31 19 49.2
Contact Angle: 25°
Aligning: Aligning Bearing
Separated: Separated
Rows Number: Multiple
Load Direction: Radial Bearing
Material: Carbon Steel

###

Samples:
US$ 4/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

Bearing mm h a e b S1 S2 g w n Bi
UCP202 15 30.2 127 95 38 13 19 14 62 11.5 27.4
UCP203 17 30.2 127 95 38 13 19 14 62 11.5 27.4
UCP204 20 33.3 127 95 38 13 19 14 65 12.3 31
UCP205 25 36.5 140 105 38 13 19 15 71 14.3 34.1
UCP206 30 42.9 165 121 48 17 21 17 83 15.9 38.1
UCP207 35 47.6 167 127 48 17 21 18 93 17.5 42.9
UCP208 40 49.2 184 137 54 17 21 18 98 19 49.2
UCP209 45 54 190 146 54 17 21 20 106 19 49.2
UCP210 50 57.2 206 159 60 20 25 21 114 19 51.6
UCP211 55 63.5 219 171 60 20 25 23 126 22.2 55.6
UCP212 60 69.8 241 184 70 20 25 25 138 25.4 65.1
UCP213 65 76.2 265 203 70 25 29 27 151 25.4 65.1
UCP214 70 79.4 266 210 72 25 31 27 157 30.2 74.6
UCP215 75 82.6 275 217 74 25 31 28 163 33.3 77.8
UCP216 80 88.9 292 232 78 25 31 30 175 33.3 82.6
UCP217 85 95.2 310 247 83 25 31 32 1870 34.1 85.7
UCP218 90 102 327 262 88 27 33 33 200 39.7 96

###

Bearing mm a e b i g l z s n Bi
UCFL202 15 113 90 60 15 12 25.5 30.9 12 11.5 27.4
UCFL203 17 113 90 60 15 12 25.5 30.3 12 11.5 27.4
UCFL204 20 113 90 60 15 12 25.5 33.7 12 12.3 31
UCFL205 25 130 99 68 16 14 27 35.8 16 14.3 34.1
UCFL206 30 148 117 80 18 14 31 40.2 16 15.9 38.1
UCFL207 35 161 130 90 19 16 34 44.4 16 17.5 42.9
UCFL208 40 175 144 100 21 16 36 51.2 16 19 49.2
UCFL209 45 188 148 108 22 18 38 52.2 19 19 49.2

###

Bearing mm h a e b
UCC202 15 72 20 11.5 27.4
UCC203 17 72 20 11.5 27.4
UCC204 20 72 20 12.3 31
UCC205 25 80 22 14.3 34.1
UCC206 30 85 27 15.9 38.1
UCC207 35 90 28 17.5 42.9
UCC208 40 100 30 19 49.2
UCC209 45 110 31 19 49.2

Types of Ball Bearings

If you’re looking to purchase a new ball bearing, there are many different types available. Learn about Single-row designs, Ceramic hybrid bearings, and Self-aligning ball bearings. You can also choose from stainless steel or single-row designs. Then, read about the different types of materials available to you. You’ll have an easier time making a decision. After all, you won’t have to worry about maintaining your new ball bearing, since it will be maintained by your supplier.
bearing

Single-row designs

Ball bearings with a single-row design have a high load-carrying capacity. They are used in applications where high loads must be handled smoothly. A single-row design is a good choice when the material’s properties require high load-carrying capacity but limited axial load capability. Single-row designs use two bearings with similar design features, but they have different mounting methods. Single-row designs can be adjusted either against one another to accommodate axial loads.
The single-row design is suitable for high-speed applications, but also has some disadvantages. The contact angle a is the angle between the radial plane and contact line. The larger the angle, the higher the axial load carrying capacity of the bearing. Single-row angular contact ball bearings are suitable for higher axial forces. Single-row angular contact ball bearings have a single-row design and support high axial forces in one direction. Single-row ball bearings are available in both pressed steel and machined steel cages.
Angular contact ball bearings with a single row feature a cage made of fiber-glass reinforced polyamide 66. These are available in diameters up to 130 mm. Four-point angular contact ball bearings use brass, steel, or brass plate. They have good running properties and a low coefficient of linear expansion. Single-row designs are easy to mount and are widely available. Alternatively, they can be mounted with a universal match design, which allows them to be easily adjusted.
One-row angular contact ball bearings are generally not suitable for angular misalignments because they are unsuitable for compensation of angular misalignments. Misalignments cause internal forces in the bearing which reduce its radial load capacity and life expectancy. This type of bearing is not suitable for adjacent mounting as it increases the chances of misalignment. However, it is a suitable choice for applications where only one bearing is required per bearing position.

Ceramic hybrid bearings

While all-ceramic bearings are limited to very specialized applications, Si3N4-based hybrid bearings are finding use in a wide range of high-speed machines. Compared to steel, ceramics are less susceptible to centrifugal forces, which are directly proportional to the mass of the balls. Because Si3N4 replacement balls have a lower density than steel, these bearings reduce the stress placed on the outer race.
The benefits of hybrid bearings are clear: they allow for higher speeds and loads than full-ceramic bearings, and they require no lubrication. Because of their many benefits, many industrial equipment operators are switching to these innovative bearings. CBR is one company that specializes in ceramic hybrid bearings and can help you find the best product for your application. If you are thinking about purchasing ceramic bearings for your next machine, here are some things you need to know about them.
A ceramic ball bearing surface has an extremely low coefficient of friction, which is important for applications that require low friction and high speeds. Ceramic balls also have a higher hardness than steel balls, which increases their life. In addition to this, ceramic hybrid bearings have superior thermal properties, generating less heat even when spinning at high speeds. These properties make ceramic hybrid bearings an ideal choice for high-speed machinery, especially electric motors. They are also suitable for applications that operate under water.
A ceramic ball hybrid bearing is much less susceptible to temperature fluctuations and wear. Because they are essentially indestructible, ceramic balls do not generate wear particles from the adhesive wear. They can run at significantly higher speeds than steel balls. Ceramic balls are also more resistant to moisture. For this reason, grease is a recommended lubricant in most ceramic bearing applications. These lubricants offer superior protection against moisture and corrosion. Further, they are available in many types.
bearing

Self-aligning ball bearings

A self-aligning ball bearing is one type of self-aligning bearing. These bearings are recommended for use in flex shaft systems. Their self-aligning feature prevents them from misaligning when in use. They can be used in both single and multiple-joint systems. In addition to self-aligning ball bearings, these units also feature flex shafts.
These self-aligning ball bearings come in a variety of configurations, including cylindrical, round, tapered, and straight bore. Their inner ring is tapered to meet specific tolerances. They are suitable for operating temperatures ranging from -30°F to 120°F. Their wide range of applications allows them to be used in general machinery, precision instruments, and low noise motors. In addition, they are available in a variety of outside diameters, widths, and internal clearances.
Self-aligning ball bearings have two rows of balls and one common sphered raceway in the outer ring. This enables them to automatically compensate for angular misalignment, which may be caused by machining and assembly errors or deflections. Compared to spherical roller bearings, these self-aligning ball bearings generate less friction. They run cooler even at high speeds. Self-aligning ball bearings also offer free engineering support.
Self-aligning ball bearings are designed for difficult shaft alignment. They are double-row, self-retaining units, with cylindrical or tapered bores. These bearings are available in open and sealed designs, and can also be used in applications with misalignment. They are also available with an outer ring that rotates in relation to the inner ring. When it comes to shaft misalignment, self-aligning ball bearings are a great solution.

Stainless steel

Stainless steel is a metal that resists corrosion and is highly durable. Its corrosion-resistant and water-resistance properties make it a good choice for bearings in food and marine applications. Additionally, stainless steel has hygienic benefits. Here are some of the benefits of stainless steel ball bearings. Read on to learn more about these amazing bearings! We’ve included some of the most common uses for stainless steel.
Hardness is important in a ball bearing. Steel uses the Rockwell C scale to measure hardness. A grade 25 steel ball bearing is accurate to 25 millionths of an inch, while a grade five ceramic bearing is less than a half-inch round. Although roundness is important, it shouldn’t be overemphasized, as the bearing surfaces may not be as accurate as the grade of the metal. And remember, a higher price tag doesn’t mean a better product.
Stainless steel ball bearings are available in a variety of alloys. The alloys used in manufacturing a stainless steel ball bearing vary in hardness, strength, and ductility. Stainless steel ball bearings have high corrosion-resistance properties. Additionally, they have long lubrication lives. These benefits make them a popular choice for industrial applications. These bearings are easy to maintain, reduce replacement costs, and offer corrosion resistance.
The NTN Sentinel Series is a premium line of stainless steel bearings. The solid lube is NSF H1 registered and prevents grease from leaching into food. It is also corrosion-resistant and doesn’t need to be coated. The seals and slinger create a water-resistant barrier between the steel ball and the lubricant. It also adds safety and security to the bearing.
bearing

Plastic balls

For applications where noise and weight are major concerns, plastic balls are ideal. These non-magnetic balls are ideal for MRI X-ray machines and sensors. They are also easy to lubricate, and are non-magnetic. A polymer ball bearing is the lightest of all three types. This makes them a good choice for many industries. Read on to learn more. This article will introduce some of the advantages of plastic balls for ball bearings.
Although ceramic ball bearings are more durable and offer many advantages, they are more expensive than plastic. Fortunately, plastic ball bearings offer a cheaper alternative. These bearings feature all-plastic races and cages. Depending on the application, plastic balls can be used in applications involving chemicals. In these cases, plastic ball bearings are available with a C160 grade, which is safe for use in temperatures below 176 deg F.
Medical devices often require precision specialty balls, which are made of glass, stainless steel, and plastic. These bearings must meet stringent cleanliness requirements. To meet the most stringent requirements, they must undergo ultrasonic cleaning. These bearings are available in plastic raceways, and are also available with glass or stainless steel balls. Polyethylene balls are lightweight and can be used in a variety of applications. They can be ordered in different sizes and tolerances to meet specific requirements.
Plastic balls for ball bearings are often mounted into other parts, such as plastic wheels, pulleys, and housings. They can be seamlessly integrated into other parts of a machine, which reduces assembly time and improves affordability. One important advantage of plastic bearings is that they are rust-resistant. As such, they can be used in harsh environments without causing any damage. If a piece of equipment is exposed to extreme temperatures, polymers are the ideal choice.

China P205 P206 P207 Saf Pillow UCP205 CAD Base Bearing Ukp Unit UCP 206 F205 Pillow Block Bearing carrier bearingChina P205 P206 P207 Saf Pillow UCP205 CAD Base Bearing Ukp Unit UCP 206 F205 Pillow Block Bearing carrier bearing
editor by czh 2022-12-22